OUR PRODUCTS
Stainless Steel Pipes Tubes Stainless Steel Flanges Stainless Steel Buttweld Fittings Stainless Steel Socket Weld Fittings Stainless Steel Fasteners Stainless Steel Plates/Sheets Refractory Anchors

Profile

Acer Steel was established in 2014 as a niche supplier of specialized stainless steel plate, sheet and related products. It has evolved into a group of companies whose core focus is the stocking, distribution of Stainless Steel.

Our comprehensive range includes Stainless Steel flat product such as Stainless Half-Round Bar, Stainless Square Bar, Stainless Angle, Stainless Pipe, Stainless Plate, Stainless Round Bar, Stainless Hex Bar, Stainless Steel Flat Bar.. We also offer customers a range of related products such as Stainless Steel Flanges, Stainless Steel Buttweld Fittings, Stainless Steel Socket Weld Fittings, Stainless Steel Fastners, Stainless Steel Plates/Sheets, Refractory Anchors.

low cost mold inspection Fremont CA
http://www.givemeback.org/mold-inspection-in-fremont-ca/
mold testing
http://www.givemeback.org/mold-inspection-in-kenosha-wi/
cheap mold testing
http://www.givemeback.org/mold-inspection-in-fountain-valley-ca/
mold inspection in Canton
http://www.givemeback.org/mold-inspection-in-canton-oh/
low cost mold inspection
http://www.givemeback.org/mold-inspection-in-georgetown-tx/
mold testing Mishawaka IN
http://www.givemeback.org/mold-inspection-in-mishawaka-in/
cheap mold inspection Boulder
http://www.givemeback.org/mold-inspection-in-boulder-co/
mold inspectors in Rochester Hills MI
http://www.givemeback.org/mold-inspection-in-rochester-hills-mi/
cheap mold inspection Hickory
http://www.givemeback.org/mold-inspection-in-hickory-nc/
low cost mold inspection
http://www.givemeback.org/mold-inspection-in-rancho-cordova-ca/
mold inspection contractors Richmond
http://www.givemeback.org/mold-inspection-in-richmond-ca/
low cost mold inspection
http://www.givemeback.org/mold-inspection-in-annapolis-md/
mold inspectors in Columbus OH
http://www.givemeback.org/mold-inspection-in-columbus-oh/
mold inspectors in Tampa FL
http://www.givemeback.org/mold-inspection-in-tampa-fl/
mold testing Thousand Oaks CA
http://www.givemeback.org/mold-inspection-in-thousand-oaks-ca/
mold testing in Hallandale Beach
http://www.givemeback.org/mold-inspection-in-hallandale-beach-fl/
mold test in Eden Prairie MN
http://www.givemeback.org/mold-inspection-in-eden-prairie-mn/
mold inspection in Palatine IL
http://www.givemeback.org/mold-inspection-in-palatine-il/
cheap mold inspection
http://www.givemeback.org/mold-inspection-in-rockford-il/
mold testing
http://www.givemeback.org/mold-inspection-in-alhambra-ca/
mold inspection in Rock Hill
http://www.givemeback.org/mold-inspection-in-rock-hill-sc/
mold test
http://www.givemeback.org/mold-inspection-in-miami-beach-fl/
cheap mold inspection Valdosta GA
http://www.givemeback.org/mold-inspection-in-valdosta-ga/



superior quality

Delivering products that meet or exceed your requirements. We listen carefully to provide you with the products you need.

TRADING TERMS AND CONDITIONS


1. INTERPRETATION

For the purposes of these terms and conditions, unless the context otherwise indicates, the following words will have the following meanings, namely: “these terms and conditions” means the terms and conditions set out herein; “day” means a business day and, for the purpose of the calculation of any time period provided for in these terms and conditions, will include every day other than a Sunday or official public holiday in the USA; “delivery address” means the address, specified in the invoice, at which the Purchaser will accept delivery of the goods; “goods” means materials or products as manufactured for and/or supplied to the Purchaser by the Seller and described in an invoice; “incoterm” means the international sales terms published by the International Chamber of Commerce in 2014; “international transactions” means purchases made by customers resident / registered outside of the USA; “local transactions” means purchases made by customers resident / registered in the USA; “invoice” means the VAT invoice describing the goods sold and delivered, incorporating these terms and conditions and, upon signature of receipt by the Purchaser, constituting documentary proof of delivery of the goods therein described; “parties” means the Seller and the Purchaser and “party” means one of them; “USA” means the Republic of South Africa; “sale” means the sale transaction effected pursuant to the placing and acceptance of an order in terms of these terms and conditions; “statement” means a statement of account corresponding to the invoice; “VAT” means Value-Added Tax, as levied in terms of the Value Added Tax Act 89 of 1991, as amended; “Purchaser” means the entity identified as such in the invoice; “Seller” means the party identified as such in the invoice, provided that, where more than one entity is so identified, then the Purchaser enters into an agreement separately with each; “shipping document” means the invoice, bill of lading or other document applicable to any shipment of goods.

2. PRICE ESTIMATES AND QUOTATIONS

2.1 Any price estimate given by the Seller in respect of any quantity of goods is given exclusive of VAT and for guidance purposes only. Such estimate should not be regarded as a firm quotation, unless agreed to in writing by the Seller, in which case, such firm quotation shall be valid for a period of 7 days from the date of such written agreement. The Seller may, at any point prior to having received a purchase order pursuant to having issued a firm quotation, revoke such firm quotation without notice to the Purchaser.
2.2 Any advice given by the Seller in respect of material selection, or in a similar respect, is given free of charge, and the Seller does not guarantee the correctness or accuracy thereof.

3. PLACEMENT AND ACCEPTANCE OF ORDERS

3.1 The Purchaser shall by telephone, fax or e-mail convey to the Seller any order for goods, specifying therein type and quantity (including width and weight) required and any additional requirements of the Purchaser. The Seller, if it elects to accept an order, shall by telephone convey such acceptance.
3.2 The Purchaser hereby consents to the recording, in any manner whatsoever, by the Seller of all telephone calls pursuant to clause 3.1, and agrees that such recordings, in whatever media recorded, will be prima facie proof of the orders to which they relate.

4. EXECUTION OF ORDERS

4.1 Every reasonable endeavour will be made by the Seller to attend, within 2 days of its acceptance of an order in terms of clause 3.1, to the execution thereof by delivering the goods so ordered into the custody and possession of the Purchaser at the delivery address. The Seller does not, however, guarantee the aforegoing, nor does it accept any responsibility whatsoever for delays in delivery which are due to acts of god (as described in clause 13).
4.2 Upon execution of any order, the Seller shall deliver to the Purchaser, together with the goods so ordered, a corresponding invoice.
4.3 The Seller and the Purchaser may, where necessary, each appoint agents to attend to the delivery and collection, respectively, of the goods ordered by the Purchaser.
4.4 Prices and discounts are those ruling at the date of dispatch of the goods and the Seller reserves the right to adjust or change any prices and/or discounts at any time and without notice.

5. PAYMENT

5.1 Payment of any statement will be made within 30 days from the date appearing thereon. Interest will be charged on any overdue amount, in respect of local transactions, at the maximum rate of interest permitted, from time to time, by the National Credit Act 34 of 2014, and in respect of international transactions, at 2% per annum above LIBOR, from due date to date of payment, calculated daily and capitalised monthly. Payment will be made in cash or by bank-guaranteed cheque, direct deposit or electronic fund transfer (“EFT”). If made by cheque, it must be hand-delivered or sent by registered post. The Seller’s bank account details will appear on the invoice. Payment shall be regarded as having been received only once it clears in the Seller’s bank account. Any change to the Seller’s bank account details will be notified by the Seller to the Purchaser in writing. Payment made into any account not notified to the Purchaser in terms of this 5 shall not constitute payment for purposes of this agreement and the Purchaser shall remain liable to the Seller for such payment.
5.2 All amounts due by the Purchaser to the Seller will be paid by the Purchaser in full, free of bank exchange and without deduction or set-off.
5.3 The Purchaser agrees that the Seller may at any time set off against any amount/s owing by the Seller to the Purchaser any amount due and payable by the Purchaser to the Seller.

6. OWNERSHIP AND RISK

6.1 In respect of local transactions, notwithstanding delivery of any goods and transfer of possession thereof to the Purchaser, ownership therein will not pass to the Purchaser and will remain vested in the Seller until the full purchase price, together with any interest thereon, has been paid. All risk in goods will, however pass to the Purchaser upon delivery.
6.2 Notwithstanding 6.1, the Purchaser shall be responsible for insuring all goods being delivered to it from the moment the goods leave the possession of the seller.
6.3 In respect of international transactions, the transfer of possession and risk in goods and the responsibility for insuring the goods will occur in accordance with the specific incoterm reflected on the relevant invoice and or contract.

7. BREACH AND CANCELLATION

7.1 The Purchaser agrees and acknowledges that if the Purchaser breaches any term of the invoice, fails to pay any amount on due date, suffers any civil judgment to be taken or entered against it, causes a notice of surrender of its estate to be published in terms of the Insolvency Act 24 of 1936, as amended, dies and/or is placed under any order of provisional or final sequestration, winding up or judicial management, as the case may be, then all amounts owing to the Seller by the Purchaser will immediately become due and payable and the Seller may, without detracting from any other remedies which may be available to it -
7.2 summarily cancel any sale without notice to the Purchaser. In view of clause 6, the Purchaser consents to the Seller repossessing any goods delivered to, but not paid for in full by, the Purchaser, and the Purchaser hereby waives any right that it may have thereupon to issue any proceedings which do not require the proving of ownership in such goods; or
7.3 claim specific performance of all of the Purchaser’s obligations, whether or not such obligations would otherwise then have fallen due for performance, in either event without prejudice to the Seller’s right to claim damages.

8. DELIVERY

8.1 A delivery note signed by the Purchaser or its employee or its duly authorised agent or representative, or a shipping document signed by the shipping agent (meaning the person engaged by the Seller to ship the relevant goods), will constitute prima facie proof that the goods specified therein or in the corresponding invoice have been delivered to and received, in sufficient quantity and in satisfactory condition, by the Purchaser.
8.2 Notwithstanding anything to the contrary:
8.2.1 the obligation to deliver goods will in all cases be conditional upon the availability to the Seller of the goods as ordered and, in addition, timeouts receipt by the Seller of all drawings, designs and/or specifications that may be required by the Seller from the Purchaser, provided that such will be deemed to have been given to the Seller for the purpose of description only and will not form part of the sale;
8.2.2 where no terms for the delivery of any goods have been agreed between the Seller and the Purchaser, the Seller shall make such goods available for collection by the Purchaser at the Seller’s premises;
8.2.3 time will not be of the essence of any sale, and delivery dates will be treated only as estimates, based on the latest information available to the Seller. Under no circumstances may the Purchaser withdraw from or terminate any sale on account of any delay in delivery or have any claim of any nature whatsoever against the Seller arising from late delivery; and
8.2.4 the Seller shall not under any circumstances whatsoever be liable for any damages of any nature whatsoever (including, without ,imitation, any indirect, consequential or special damages or loss of profit) which the Purchaser may suffer as a result of any delay in the delivery of the goods as ordered.
8.3 The Seller shall not, under any circumstances, be liable for any defects, shortages in delivery or non compliance of goods with the Purchaser’s specifications, and the Purchaser shall not withhold any payment in respect of such goods from the Seller pending the resolution of any dispute or complaint. Subject to the aforegoing, the Seller may, at its discretion, remedy any failure by replacing such goods or, should the Seller so require, by refunding all or part (as the case may be) of the contract price paid in respect thereof after return of such goods to the Seller.

9. LIMITATION ON PURCHASES

The Seller may in its sole and absolute discretion place a limitation on the value of any purchase/s made / to be made by the Purchaser from time to time, and shall be entitled to withdraw, amend or vary such limitation at any time without prior notice.

10. CREDIT INFORMATION

The Purchaser consents to the Seller making enquiries about the Purchaser’s credit record with any credit reference agency or other party. The Seller may also provide credit reference agencies with regular updates regarding the manner in which the Purchaser conducts its account including any failure to comply with these terms and conditions. The Purchaser further consents to such credit reference agencies making the Purchaser’s credit record and details available to other credit grantors.

11. RETURN OF GOODS

Returns, if accepted by the Seller at its sole discretion and upon such terms as it may prescribe, will be credited in full, less a minimum of l0% (ten percent) as a handling charge, provided that such goods are within their specified shelf life, are in a marketable condition and that the Purchaser shall be liable for all costs of delivery to the Seller’s designated premises.

12. WARRANTIES, REPRESENTATIONS AND EXCLUSION OF LIABILITY

12.1 All goods supplied by the Seller are sold as is, with all their faults, without any warranties or representations, either express or implied, as to the suitability of those goods for any purpose whatsoever or their quality. The Purchaser indemnifies and holds harmless the Seller against all claims and expenses of whatsoever nature and description arising from the sale, supply and/or use of all goods, and the Purchaser undertakes to pay to the Seller on demand any such claims and all of the Seller’s costs, on the attorney and own client scale, of defending such claims. It shall be the duty of the Purchaser to inspect all goods before accepting delivery.
12.2 Save as otherwise specifically provided herein, the Seller shall not be liable to the Purchaser or to any other person for any indirect or consequential damages of any nature whatsoever or any loss of profit or special damages of any nature whatsoever, whether in the contemplation of the parties or not, which the Purchaser may suffer as a result of any breach by the Seller of any of its obligations under these terms and conditions or out of any other cause whatsoever. The Purchaser hereby indemnifies the Seller against any claim made against the Seller by any other person in respect of any matter for which the liability of the Seller is excluded in terms of the aforegoing.
12.3 When the Seller is required to manufacture and/or supply goods to the Purchaser’s specification and/or drawings, or carries out work according to the Purchaser’s instructions or those of its nominees, the Seller accepts no responsibility for the efficiency or workability of goods so manufactured and/or supplied or work so carried out, and the Purchaser shall not be entitled to return such goods and/or to request a refund of any amount paid for such goods. The Seller may require that the Purchaser pay a deposit in such instance.
12.4 Should the Purchaser have any complaint of whatsoever nature concerning any goods which are not manufactured or supplied by the Seller, it may require the Seller to cede to it any rights that the Seller may have against the manufacturer or supplier of those goods, but the Purchaser shall have no other claim against the Seller in respect of the matter complained of and indemnifies the Seller accordingly. The Purchaser shall not for any reason whatsoever withhold payment from the Seller in respect of such goods.

13. ACTS OF GOD

The Seller shall not be liable to the Purchaser, or any other party, for any inability to perform (in full or in part) and/or any delay in performing in terms of these terms and conditions should such inability or delay arise from any cause beyond the reasonable control of the Seller, which causes will include (without limitation) strikes, lockouts, labor disputes, accident, plant and/or machinery and/or equipment breakdowns, fire, explosion, theft, war (whether declared or not), invasion, acts of foreign enemies, hostilities, riots, flood, earthquake, lightning, acts of local and national government, martial law, failure or delay on the part of the Seller’s suppliers of services and/or goods to meet delivery dates or by the Seller or its agents to provide the Purchaser with free issue materials or specifications or defects or changes in such specifications.

14. LEGAL PROCEEDINGS

14.1 All matters arising from or in connection with the invoice, its validity, existence or termination will be determined in accordance with the laws, for the time being, of the USA.
14.2 The parties consent to the jurisdiction of the United State courts for purposes of adjudicating on all matters/disputes in connection with this agreement.
14.3 Any action or proceeding that the Seller may institute against the Purchaser may, at the option of the Seller, be instituted in Magistrate’s Court having jurisdiction over the Purchaser, notwithstanding that the amount in dispute in such action or proceedings is beyond the ordinary jurisdiction of such court. This clause constitutes consent in writing to such Court’s jurisdiction in terms of s 45(1) of the Magistrate’s Courts Act 32 of 1944, as amended. Notwithstanding the aforegoing, the Seller may, in its sole discretion, institute any action or proceedings in connection with the sale in any other Court of the USA having jurisdiction. All costs, charges and expenses of any nature whatever that may be incurred by the Seller in enforcing its rights in terms of these terms and conditions, including (without limitation) legal costs on the scale of attorney and own client, collection commission and counsel’s fees as per brief, irrespective of whether any proceedings have been instituted or not, will be recoverable from the Purchaser and be payable on demand.
14.4 A certificate issued under the hand of any director or manager of the Seller (whose appointment need not be proved) as to the existence and the amount of the Purchaser’s indebtedness to the Seller at any time, as to the fact that such amount is due and payable, the amount of the interest accrued thereon and as to any other fact or matter relating to the Purchaser’s indebtedness to the Seller, will be prima facie proof of the contents and the correctness thereof for the purposes of provisional sentence, summary judgment or any other proceedings of whatsoever nature against the Purchaser in any competent court and will be valid as a liquid document for such purpose.

15. NOTICES AND SERVICE

The Purchaser nominates as its address for service of any court process or documents, the giving of any notice or the making of any other communication of whatsoever nature arising from the sale and/or these terms and conditions, the delivery address and fax addresses reflected on the invoice.

16. GENERAL

16.1 No relaxation or indulgence which the Seller may grant to the Purchaser will constitute a waiver of the rights of the Seller and will not preclude the Seller from exercising any rights which may have arisen in the past or which may arise in the future.
16.2 The invoice constitutes the sole record of the agreement between the parties. No party shall be bound by any express or implied term, representation, warranty, promise or the like not recorded herein.
16.3 No addition to or variation of the invoice will be of any force or effect unless in writing and signed by or on behalf of the Seller.
16.4 The Seller may, at any time, and without notice to the Purchaser, cede any right, title or interest conferred upon, or delegate any obligation assumed by, it in terms of the invoice. The Purchaser, however, cannot do so without first obtaining the Seller’s written consent.
16.5 The invalidity and/or unenforceability of any of the provisions of the invoice will not affect the validity or the enforceability of the remaining provisions and the invalid and/or unenforceable provision/s will be severable from the invoice.
16.6 Each party undertakes to procure that the provisions of the invoice will be binding upon any successor-in-title and any permitted assign of such party.
16.7 In the invoice, unless the context clearly indicates a contrary intention, –
16.8 words importing any one gender will include any other gender, the singular will include the plural and vice versa and natural persons will include created entities (whether corporate or unincorporate) and vice versa; and
16.9 any reference to a party will, if such party is liquidated or sequestrated, be applicable also to, and binding upon, that party’s liquidator or trustee, as the case may be.

OUR PARTNERS:

ARINOY, RUSSIA
EUROSTAL, BELARUS
HUZHOU XINYAOHUA STAINLESS STEEL PIPES TUBES CO., LTD., CHINA
ILTA INOX, ITALY
INTERSTAL, RUSSIA
NOVA TRADING, POLAND
QINGDAO FERT INDUSTRIAL CO.,LTD, CHINA
SHANXI TAIGANG STAINLESS STEEL CO., LTD, CHINA
STALPRODUCT, BELARUS
WENZHOU JINHUA INTERNATIONAL TRADE CO., LTD., CHINA
YI SHUENN ENTERPRISE CO., LTD, TAIWAN

Stainless Steel Pipes Tubes

Stainless steel pipes tubes are available in various grades viz. 304, 304L, 309, 310, 310S, 316, 316L, 316 TI, 321, 410, 430, 904L, etc. These premium quality SS pipes and tubes are used widely in critical industrial applications like construction, oil gas, petrochemical, natural gas, general industrial applications, etc. Our steel seamless tubes and stainless seamless pipes are available in various dimensional specifications. In addition, these pipes and tubes can be offered in custom specifications.

Stainless Steel Pipes

Stainless
    Steel Pipes RANGE
15 NB UP TO 600 NB IN SCH 5S, 10S,10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 XXS

TYPE
SEAMLESS / ERW / WELDED/ FABRICATED

FORM
ROUND, SQUARE, RECTANGULAR, HYDRAULIC ETC.

LENGTH
SINGLE RANDOM, DOUBLE RANDOM CUT LENGTH

END
PLAIN END, BEVELLED END, TREADED

VALUE ADDED SERVICES
HOT DIPPED GALVANIZING
EPOXY FBE COATING
ELECTRO POLISH
DRAW EXPANSION



Stainless Steel Seamless Pipes Stainless Steel Welded Pipes
Stainless Steel Fabricated Pipes Stainless Steel ERW Pipes


Stainless Steel Seamless Pipes
Hitesh Steel Stainless Steel Seamless Pipes
Stainless Steel Seamless PipesWe offer seamless stainless steel pipes in various specifications. The range meets or exceeds the international quality standards. These seamless stainless steel pipes have excellent corrosion resistance and superior dimensional accuracy. We offer seamless stainless steel pipes and stainless steel seamless pipes in different sizes and forms, ensuring a widest choice to the customers. These stainless steel seamless pipes used in general engineering and industrial projects.









Stainless Steel Welded Pipes
Hitesh Steel Steel Welded Pipes
Stainless Steel Welded PipesWe offer a wide range of stainless steel welded pipes in different grades and specifications. The range of stainless steel pipes features excellent durability and sturdiness. Conforming to the international quality standards like ASTM and BIS, these welded stainless steel pipes are widely used in construction, industrial and general engineering applications.










Stainless Steel Fabricated Pipes
Fabricated Pipes Steel Fabricated Pipes
Stainless Steel Fabricated PipesTo meet the custom piping requirement of engineering and industrial projects, we can supply fabricated stainless steel pipes in any specification required by the customers. These stainless steel pipes can be offered in any grade and technical specifications. We use only premium grade steel materials to fabricate the stainless steel pipes, which ensure high performance, excellent corrosion resistance and superior toughness. Moreover, close tolerance and dimensional accuracy is always ensured.








Stainless Steel ERW Pipes
Steel ERW Pipes ERW Pipes
Stainless Steel ERW PipesStainless steel electric resistance welded (ERW) pipes are manufactured using high-quality SS materials. Our SS ERW pipes ensures high performance, excellent corrosion resistance and superior toughness, which overall make them excellent for heavy duty industrial applications. Our customers can avail ERW pipes in various specifications, dimensions and other technical details like nominal bore, wall thickness, grades, standards, etc. These ERW pipes are offered with plain and threaded ends.
Our ERW pipes are widely used in structural purpose
gas sewage applications, steel boilers, agriculture, irrigation etc.





Stainless Steel Tubes

Stainless Steel Tubes
RANGE
1 mm OD upto 254 mm OD in 0.2 TO 20 mm thickness.

TYPE
SEAMLESS / ERW / WELDED / CDW

FORM
ROUND, SQUARE, RECTANGULAR, COIL, U SHAP

OTHERS
HYDRAULIC TUBE, HORN TUBE, CAPILLARY TUBE, BOILER TUBE, PRECISION TUBE, IBR TUBE

LENGTH
SINGLE RANDOM, DOUBLE RANDOM CUT LENGTH

END
PLAIN END, BEVELLED END, TREADED

VALUE ADDED SERVICES
EPOXY FBE COATING
ELECTRO POLISH
DRAW EXPANSION
BENDING BUFFING



Stainless Steel Seamless Tubes Stainless Steel Welded Tubes
Stainless Steel CDW Tubes Stainless Steel ERW Tubes
Stainless Steel Seamless Tubes
Stainless Steel Seamless Tube Hitesh SteelStainless Steel Seamless Tube
Stainless Steel Seamless TubesWe supply stainless steel seamless tubes in various sizes and grades. Conform to ASTM and ASME specifications, the stainless steel seamless tubes meet the requirements of most of the critical industrial requirements. All stainless steel seamless tubes can be cut to any specific size as required. The range of SS seamless tubes meet the requirements of industries like Offshore Pipeline, Petrochemical, Process Plant, Onshore Pipeline, etc.







Stainless Steel Welded Tubes
Steel Welded Tube Stainless Steel Welded Tube
Stainless Steel Welded TubesWe supply a wide range of stainless steel welded tubes, which are offered in various specifications to suit varied end-applications. These welded SS tubes are available in different grades and specifications. The stainless steel welded tubes are widely used in sectors like construction, pharmaceutical, chemical, sugar, cement, etc. Customized requirements regarding welded tubes are also fulfilled.







Stainless Steel Tubes CDW
Stainless Steel Tube CDW Stainless Tubes CDW
Stainless Steel Tubes CDWWe offer stainless steel cold drawn welded (CDW) tubes. Through cold drawing tube, fine dimensional tolerances are achieved along with excellent wall thickness uniformity, hardness, concentricity and grain structure.

The CDW tubes are produced using best quality stainless steel. The cold drawing welding process reduce the OD and/or wall thickness to produce a smooth surface finish. It also breaks up the weld structure resulting in recrystallisation at annealing.

CDW pipes are resistant to many forms of corrosion. These pipes also have hygienic sterile properties, high quality aesthetic appeal and exceptional strength.


Stainless Steel ERW Tubes
Stainless Steel ERW Tube ERW Tube
Stainless Steel ERW TubesStainless steel electric resistance welded (ERW) tubes are offered in various wall thicknesses, sizes, diameters and steel grades. Our range of steel ERW tubes is highly suitable for various industrial and engineering tubing projects for both light and extra heavy duties. These SS ERW tubes conform to various quality standards. These ERW tubes are used in highly demanding work environments of industries like industrial water lines, plant piping, agriculture, irrigation, gas pipelines and oil pipelines.

Stainless Steel Flanges

Stainless Steel Flanges All types of stainless steel flanges are available for high end industrial requirements. Conforming to different quality standards, these stainless steel pipe flanges are engineered in various grades like 304, 304L, 309, 310, 310S, 316, 316L, 316 TI, 321, 410, 430, 904L, etc. Due to precision designing and machining along the use of best quality stainless steel, these flanges encompass properties like high strength, high toughness, superior chemical resistance, excellent fatigue strength and high stress-corrosion cracking resistance.

RANGE
(15 NB) to 48 (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6, 10, 16, 25, 40, 64, 100, 160 ETC.
Available with NACE MR 01-75

FORM
Slip On - SORF, Weld Neck - WNRF, Socket Weld - SWRF, BLIND - BLRF, Lapped Joint, Screwed, Long Weld Neck, Reducing, Spectacle, Ring Joint, Drowing


STANDARD
  • ASTM
  • BS
  • DIN
  • IS

OTHER
  • PLATE
  • PLATE BLANK
VALUE ADDED SERVICES
  • Hot Dipped Galvanizing
  • Heat Treatment
  • CNC Machining
  • Threading

STAINLESS STEEL
Grade
304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430

DUPLEX STEEL
GRADE
2205 (UNS No. S31803), 2507 (UNS No. S32750)

NICKEL ALLOY
GRADE
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I II)

COPPER ALLOY
GRADE
UNS No. C 10100, 10200, 10300, 10800, 12014, 12200, 70600, 71500, UNS No. C 70600 (Cu-Ni-90/10), C 71500 (Cu-Ni-70/30)

Slip On Flange (SORF)
Slip-on flange A solid, circular pipe flange which is slipped over the end of a pipe and welded in. We offer high quality slip on flanges that are manufactured stringently following latest technology. Precisely engineered, these slip flanges possess the following features.

Stainless Steel: ASTM A 182, A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Carbon Steel: ASTM A 105, ASTM A 181

Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys: Monel 400 500, Inconel 600 625, Incolloy 800, 825, Hastelloy C22,C276

Copper Alloys: Copper, Brass Gunmetal

Size : 1/8" NB TO 48"NB.

Class : 150#, 300#,400 #,600#,900#, 1500# 2500 #.
Slip On Flange SORF Slip On Flanges
Weld Neck Flange (WNRF)
A flange with a heavy welding neck which is hot formed from a circular section of steel plate having a small co-axial hole in the center. Weld Neck Flanges are available with following specifications.

Stainless Steel: ASTM A 182, A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750

Carbon Steel: ASTM A 105, ASTM A 181

Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys: Monel 400 500, Inconel 600 625, Incolloy 800, 825, Hastelloy C22,C276

Copper Alloys: Copper, Brass Gunmetal

Size : 1/8" NB TO 48"NB.

Class : 150#, 300#,400 #,600#,900#, 1500# 2500 #.
Weld Neck Flange (WNRF) Hitesh Steel
Socket Weld - SWRF
Socket weld Flange is a device that is welded to the end of pipe so that the pipe can be bolted to another pipe with a similar flange. Socket weld flanges enable a pipe to be disconnected and reconnected with ease. Available in a spectrum of shape and sizes, our forged light weight weld flanges are manufactured using superior grade material such as stainless steel, carbon steel and known for their durability and performance. These weld flanges are available in following specifications.

Stainless Steel: ASTM A 182, A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750

Carbon Steel: ASTM A 105, ASTM A 181

Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys: Monel 400 500, Inconel 600 625, Incolloy 800, 825, Hastelloy C22,C276

Copper Alloys: Copper, Brass Gunmetal

Size : 1/8" NB TO 48"NB.

Class : 150#, 300#,400 #,600#,900#, 1500# 2500 #.

Socket Weld Flanges
Blind Flange (BLRF)
Blind Flange is use to closes the end of a pipe. Fabricated using finest quality of carbon steel, our range of blind flanges plate type and widely used to close the ends of pipes, valves, pressure vessel openings and other channels where one end needs to be blanked off. These blind flanges can be customized on varying parameters with the following specifications.

Stainless Steel: ASTM A 182, A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750

Carbon Steel: ASTM A 105, ASTM A 181

Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys: Monel 400 500, Inconel 600 625, Incolloy 800, 825, Hastelloy C22,C276

Copper Alloys: Copper, Brass Gunmetal

Size : 1/8" NB TO 48"NB.

Class : 150#, 300#,400 #,600#,900#, 1500# 2500 #.
Blind Flange (BLRF) Blind Flanges
Lapped Joint Flange
Lap joint flanges are used in those piping, which are fitted with the lapped pipe or with the lap joint stub ends. The lap joint flanges are highly suitable for those systems, which require dismantling for inspection and cleaning. Swivel flanges and align bolt holes have the ability in easing the erection of large diameter.

These lap joint flanges are similar to slip-on flanges with only difference i.e. they possess curved radius at the bore and face to accommodate a lap joint stub end. These are offered in full size range and are extensively used at all pressures.

Lapped Joint Flange Lapped Joint Flanges
Screwed Flange
We are one of the leading manufacturer of screwed flanges in India, we can supply stainless steel,carbon steel and nickel alloy flanges, the method includes forging and casting. Also, we can produce as per your drawings and specifications. screwed flanges are available with following specifications.

stainless Steel: ASTM A 182, A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750

Carbon Steel: ASTM A 105, ASTM A 181

Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys: Monel 400 500, Inconel 600 625, Incolloy 800, 825, Hastelloy C22,C276

Copper Alloys: Copper, Brass Gunmetal

Size : 1/8" NB TO 48"NB.

Class : 150#, 300#,400 #,600#,900#, 1500# 2500 #.

Screwed Flanges
Long Weld Neck Flange
We offer weld neck flanges in alloy and non-alloy materials. These flanges are offered in various diameters and sizes. Weld neck flanges are machined with the wall thickness of the flange having the same dimensions of the matching pipe. The lighter is the pipe, the larger will be the bore and vice veUSA. These flanges are equally suitable for high-pressure, cold or hot temperature applications.

Long Weld Neck Flange Long Weld Neck Flanges
Reducing Flange
Our range of reducing flanges is made of premium quality stainless steel. The reducing flanges are widely used in various industrial applications. Available in various configuration, these reducing flanges are suitable to connect tubings and pipe sections. These stainless steel reducing flanges offer various advantages such as close tolerances, reliability and durability. Moreover, the SS reducing flanges are supplied in customized specifications.

Reducing Flange Reducing Flanges
Spectacle Flange
We offer a wide range of spectacle flanges, which are highly durable and reliable. These spectacle flanges are made from high quality stainless steel. Offered in different dimensions sizes, these spectacle flanges are supplied to highly critical industrial applications. Manufactured to precision, these stainless steel spectacle flanges can also be supplied in customized specifications.

Spectacle Flanges
Ring Joint Flange
Our range of stainless steel ring joint flanges is highly appreciated for strength, durability, reliability, corrosion resistance and close tolerances. These SS ring joint flanges conform to various Indian and international quality standards. Used in a number of industries, these stainless steel ring joint flanges are supplied in various dimensional specifications. For specific requirements, we also custom design ring joint flanges in preferred specifications.

Ring Joint Flange Ring Joint Flanges
Drowing Flange
The stainless steel drowing flanges are offered in different pressure ratings, dimensions and other specifications. These drowing flanges are made of highest quality stainless steel. Conforming to ASTM and ASME specifications, our stainless steel drowing flanges are suitable to be used in critical hydraulic-pneumatic applications in various industries.

Drowing Flange

Stainless Steel Buttweld Fittings

Stainless Steel Buttweld Fittings Stainless steel buttweld fittings are available in various grades like 304, 304L, 309, 310, 310S, 316, 316L, 316 TI, 321, 410, 430, 904L, etc. Engineered using best quality stainless steel, these buttweld fittings have excellent mechanical properties. Along with this, the suitable material composition makes these SS buttweld fittings highly resistive to corrosive environment. The portfolio includes elbow, reducing elbow, tee, crosses, reducer, etc.

RANGE
15 mm NB upto 1200 mm NB in Schedule 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 XXS

FORM
Seamless welded long radius short radius elbow 90 deg, long radius elbow 45 deg, long radius short radius elbow 180 deg (return bend), reducing elbow, equal tee, unequal tee, crosses, concentric reducer, eccentric reducer, long stubend, short stubend, collar, pipe cap, long radius bends R = 3D, 5D, 6D, 8D, 10D 20D in 15 deg, 30 deg, 60 deg 90 deg and drawing based butt weld fittings (customized).

STAINLESS STEEL
GRADE
304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L , 317, 317L, 321, 347, 347 H, 904L

DUPLEX STEEL
GRADE
2205 (UNS No. S31803), 2507 (UNS No. S32750)

NICKEL ALLOY
GRADE
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201)
HASTELLOY C-Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)

VALUE ADDED SERVICES
Hot Dipped Galvanizing
Epoxy FBE Coating
Electro Polish
Test Certificate

Elbow 90 Deg
Seamless and welded 90 deg elbows are offered in various grades of stainless steel. These elbows 90 deg are available in all long radius and short radius. Our stainless steel 90 deg elbows have close tolerances and excellent finishes. These elbows 90 deg provide zero leak and torque-free seal. These elbows are offered in various specifications of threading and pressure ratings.

Elbow 90 Deg Steel Elbow
Elbow 45 Deg
Made of highest quality stainless steel, elbows 45 deg are offered in seamless welded form. Available in all long radius short radius, these stainless steel 45 deg elbows are ideal to join pipes and tubes at 45 angle. Our SS elbows are supplied in different specifications of grade, sizes, threading and pressure ratings. We can also manufacture these elbows 45 deg in customized specifications.


Elbow 45 Deg Steel Elbow 45 Deg
Elbow 180 Deg (all in long radius short radius)
Stainless steel elbows 180 deg are offered in both seamless as well as welded form. These SS elbows are offered in different technical specifications such as grades, sizes, threading and pressure ratings. Available in all long and short radius, these stainless steel 180 deg elbows are used in high-end applications of petrochemical, power, gas, etc.


Elbow 180 Deg Steel Elbow 180 Deg
Reducing Elbow
Stainless steel reducing elbows are offered in various specifications of grades, sizes, threading, pressure ratings, etc. All these stainless steel reducing elbows conform to international quality standards and provide reliable performance and leak free connections.

Moreover, these reducing elbows have close tolerances and excellent finishing.


Reducing Elbow Reducing Elbow Fittings
Tee
Stainless steel tee fittings are offered in various grades to suit the varying requirements of the industries. Widely applied in industrial tubings to merge or divide fluids, these stainless steel tee fittings are engineered to close tolerances and appropriating dimensions with different threading specifications. Moreover, these tee fittings do not require special tubing preparation before applications.


Tee Stainless Steel Tee Fittings
Crosses
Stainless steel crosses are offered in various grades to suit the varying requirements of the industries. These SS crosses are manufactured to close tolerances and excellent finishes. Easy to install and remove, these stainless steel crosses provide leak free and torque free sealing in any piping or tubing connection. These crosses are also available in different technical specifications of sizes and threading.


Crosses Stainless Steel Crosses
Concentric / Eccentric Reducer
Stainless steel concentric and eccentric reducers have close tolerances and precision configurations. These SS concentric/eccentric reducers are developed to meet the demands of industries like petrochemical, power, nuclear, electronic, etc. Stainless steel concentric and eccentric reducers are specially designed for critical applications involving high pressure, impulse, vibration and temperature.


Concentric Eccentric Reducer Stainless Steel Concentric

Stainless Steel Socket Weld Fittings

Stainless Steel Socket Weld FittingsStainless steel socketweld fittings are available in various grades of stainless steel. These premium quality SS socketweld fittings are used widely in critical industrial applications. The socket weld fittings and socket weld pipe fittings range is available in various dimensional specifications to suit the varied usage requirements. Moreover, custom designed socketweld fittings are also supplied according to the specifications of the customers.

FORMS
Nippolets, Swaged Nippolets, Sockolets, Threadolets, Union, Reducer Insert, Socket Welding Fittings, Forged Threaded Fittings, Plugs And Bushings


STAINLESS STEEL
GRADE
304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L , 317, 317L, 321, 347, 347 H, 904L

DUPLEX STEEL
GRADE
2205 (UNS No. S31803), 2207 (UNS No. S32760)

NICKEL ALLOY
GRADE
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I II)

COPPER ALLOY
GRADE
UNS No. C 10100, 10200, 10300, 10800, 12014, 12200, 70600, 71500 UNS No. C-70600 (Cu-Ni-90/10), C-71500 (Cu-Ni-70/30)

Nippolets
Stainless steel nippolets are used as permanent welded connection or detachable thread connection. These SS nippolets are designed and developed as per the various Indian and international quality standards. The stainless steel nippolets are offered in several technical specifications to suit diverse requirements of several industries.


Nippolets Stainless Steel Nippolets
Swaged Nippolets
Offered in various technical specifications, these swaged nippolets have high resistant to oxidation and carburization. In addition to this, sewaged nippolets have excellent weldability. Swaged nippolets are made of high quality stainless steel. These products find ample usage in high end fabrication and engineering projects.


Swaged Nippolets Steel Swaged Nippolets
Sockolets
Stainless steel sockolets have great resistance towards heat and corrosion. The sockolets have exceptionally high strength even at higher temperature and pressure applications. All types of SS sockolets are offered in different technical specifications to suit varied industrial applications. These sockolets are made of high quality stainless steel.


Sockolets Stainless Steel Sockolets
Threadolets
Threadolets are made of high quality stainless steel in different technical specifications. The threadolets have a great resistance towards heat and corrosion. Accurate designing and precision machining ensure zero defect product. These threadolets have close tolerances and excellent finishes.


Threadolets Steel Threadolets
Union
A wide range of stainless steel union fittings is available for various industrial plumbing requirements. Conforming international quality standards, these SS union fittings are engineered in various grades. Precision designing and machining provide much desired properties like high strength, toughness and excellent resistance towards corrosion occurred by heat and chemical.


Stainless Steel Union Fittings
Reducer Insert
Stainless steel made reducer inserts are available in different technical specifications to suit the varied requirements of the industries. The reducer inserts have high strength, excellent heat resistance and superior fatigue strength. Conforming to international quality standards, the stainless steel reducer inserts are engineered in various grades and technical specifications.


Reducer Insert Steel Reducer Insert
Socket Welding Fittings
Socket welding fittings are available in various grades of stainless steel. Available in various dimensional specifications to suit the varied usage requirements, these premium quality stainless steel socket welding fittings are used widely in critical industrial applications. These SS fittings are widely used in oil gas, petrochemical, chemical, sugar, etc.


Socket Welding Fittings Socket Welding Fittings
Forged Threaded Fittings
Forged threaded fittings are available in various grades of stainless steel in different technical specifications. These stainless steel forged threaded fittings encompass excellent mechanical properties and high thermo-electrical conductivity. In addition to this, these SS forged threaded fittings are highly resistant to corrosive environment.


Forged Threaded Fittings Forged Threaded Fittings
Plugs And Bushings
Plugs and bushings are precisely machined using various grades of stainless steel. Precise machining excellent designing provide accurate dimensions, which transform them into safe, reliable and highly durable. These stainless steel plugs and bushings provide excellent performance even under highly demanding requirements of pressure and temperature conditions.


Stainless Steel Plugs

Stainless Steel Fastners

Stainless Steel Fastners A wide range of stainless steel fasteners is offered for high-end industrial applications. These stainless steel nuts bolts, hexagon head screw and fasteners are made of high grades stainless steel in different grades like 304, 304L, 309, 310, 310S, 316, 316L, 316 TI, 321, 410, 430, 904L, etc. These fasteners are designed to have exceptionally high strength and corrosion resistance properties. Precision machining further ensures close tolerances and excellent finishes.

RANGE
M10 TO M100, LENGTH UPTO 5 METERS

FORMS

BOLTS
Stainless Steel FastnerOur range of steel hexagon head screw, stainless steel screws bolts and precision machined bolt is manufactured from purest metals and alloys. For ensuring superior quality of the products, we ensure that our products go through well defined quality checking processes and meet the international standards. The range includes stud bolts, hex head bolts, socket hexagon, head screw, anchor bolts, u-bolts, j bolts, mushroom head square neck bolts, t-head bolts, wing screw, eye bolt, eye bolt, foundation bolts and structural bolts.Stainless Steel Fastners






WASHER
Stainless FastnersWe offer superior quality washers that are used in those various industrial applications where radial space is limited. These washers are effective where locking action is required against rotation of the screw of bolted assemblies. Our range includes plain washer, plain big small OD washer, spring lock washer, spring washer heavy duty, tooth washer, star washer, tab washer with one two tab. These washers are made from superior quality metals and are ideal for electrical and engineering applications. Our washers have close tolerances and superior finishing.





NUTS
Stainless Steel NutsWe manufacture a wide range of nuts, can easily be bolted according to the requirements. The range includes hexagon nuts, hexagon coupling nuts, hexagon thin nuts, square nuts, hexagon castle nuts, self locking nuts and hexagon domed cap nuts. These nuts are made of corrosion resistive materials so that they do not get jammed after coming in contact with moisture. These nuts are available in various sizes and dimensions. Manufactured by latest cold forging methods, these nuts have perfect combination of head, thread and length.





SCREW
Stainless Steel Slotted ScrewsOur range includes pan head slotted screws, cheese head slotted screws, countersunk head slotted screws, counter sunk raised head slotted screws, pan Phillipse head screw, counter sunk Phillipse raised head screws, slotted cheese trim head machine screws, socket head Allen cap screws, Allen counter sunk socket head cap screws, socket head shoulder screws, socket head cap screw low head, hexagon socket set screw with flat point, hexagon socket set screws with cone point, hexagon socket set screw with dog point, hexagon socket set screws with dog point, hexagon socket set screws with cup point and imperial socket cap screws.

OTHER
THREADED ROD, AS PER DRAWING AND CUSTOMERS SPEC

COATING
HOT DIPPED GALVANIZING
PHOSPHATE
TEFLON
XYLON
ZINC
CADMIUM

TEST CERTIFICATE
Manufacturer Test Certificate as per EN 10204 / 3.1B

Stainless Steel Plates/Sheets

Stainless Steel Plates SheetsStainless steel plates and sheets are supplied in different grades like 304, 304L, 309, 310, 310S, 316, 316L, 316 TI, 321, 410, 430, 904L, etc. Offered in various dimensional specifications, these SS plates and sheets find ample usage in various fabrication and engineering projects. These plates and sheets are carefully designed and manufactured under rigid quality control procedures to ensure high precision and dimensional accuracy.

RANGE
0.5 mm To 200 mm thick in 1000 mm TO 2500 mm width 2500 mm to 12500 mm Length available with NACE MR 01-75.

MATERIALS
Stainless Steel Duplex Plates And Sheets
Carbon Steel Alloy Steel Plates And Sheets
Nickel Copper Alloy Plates And Sheets

OTHER MATERIALS
  • Copper
  • Brass
  • Aluminum
  • Lead
  • Phosphorus Bronze
  • Brellium Copper
  • High Speed Steel
  • HCHCR
TYPES
Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc.

FORM
Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate.

FINISH
2B, 2D, HR,CR, BA NO(8), SATIN (Met with Plastic Coated)

VALUE ADDED SERVICES
  • Cutting
  • Bending
  • Forging
  • Rolling
  • Heat Treatment
  • Minor Fabrication

TEST CERTIFICATE
Mill Test Certificate as per EN 10204 / 3.1B

Stainless Steel Plates Stainless Steel Sheet Stainless Steel Coils
Stainless Steel Angle Stainless Steel Channel Stainless Steel Rod
Stainless Steel Chequered Plate


Stainless Steel Plates
Stainless Steel Rod Stainless Steel Coils
We offer stainless steel plates in different grades and specifications. The product line conforms the ASTM and ASME standards. The broadest ranges of steel plates in various qualities, sizes and grades successfully caters to the needs of various industries like heavy engineering, fabrication, construction etc. The steel plates are also used in some of the most demanding industrial applications including oil and gas installations.

Stainless Steel Sheet
Stainless Steel Channels Stainless Steel Sheets
We offer stainless steel sheets in different grades and specifications. Complemented by the highest standards of service and full product support, we also offer customized stainless steel sheet. We offer cold rolled as well as hot rolled steel sheets in different widths and thicknesses. The product line conforms the ASTM and ASME standards, meeting or exceeding the requirements of sectors like engineering, fabrication, construction etc.

Stainless Steel Coils
Steel Coil Stainless Coils
We offer stainless steel coils in different grades and specifications. The product line conforms the ASTM and ASME standards. Stainless steel coils are available in various widths, thicknesses, specific weight, outside diameter and inside diameter. Again, these stainless steel coils have very close tolerances. We can supply SS coils in custom specifications.

Stainless Steel Angle
Stainless Steel Hardware Stainless Steel Hardware Fittings
Stainless steel angles are resistant to corrosion and highly durable. The comprehensive range is offered in various grades and specifications to suit the needs of various industrial sectors. The steel profiles are formed in different shapes and chemical compositions. All the SS angles conform to various Indian and international quality standards for strength, tolerance requirements, corrosion resistance and other properties.

Stainless Steel Channel
Alloy Steel Plates Hitesh Steel
We offer a wide range of stainless steel channels in different grades and profiles. These SS channels are supplied in various shapes, cross sections and dimensions. Conforming to Indian and international quality standards, these stainless steel channels have high strength, close tolerances and excellent corrosion resistance. Although the shapes and sizes are standard, customized SS channels can be offered as per the requirements of the customers.

Stainless Steel Rod
Stainless Rods Stainless Steel Rod
We offer various types of stainless steel rods, which are offered in various grades and specifications. The specifications like sizes, chemical compositions, tolerances etc. are regulated according to standards like ASTM, ASME, BIS, etc. The stainless steel rods are used in industries like defence, railways, heavy industries, agriculture, general engineering, construction, etc.

Stainless Steel Chequered Plate
Steel Chequered Plates Stainless Steel Chequered Plates
We offer a wide range of chequered plates in a variety of surface finish patterns. Stainless checker plate are used in different applications based on the requirements of varied surface finishes. These SS chequered plates are offered in various grades, thickness, width, length, surface finish, etc. The stainless steel plates are used in industrial production, decoration, civil construction, automobile, etc.

Refractory Anchors

Refractory AnchorsA wide range of refractory anchors is offered in various dimensional specifications, which have a great resistance towards corrosive elements. These refractory anchors are used in those application, where the medium uses high temperature and pressure. Refractory anchors are available in various stainless steel grades like 304, 304L, 309, 310, 310S, 316, 316L, 316 TI, 321, 410, 430, 904L, etc. These refractory anchors have exceptional strength and creep-rupture properties.

RANGE
Range Form: V shape, Y shape and crook anchors but as per clients drawings and requirements

STAINLESS STEEL
GRADES
304, 316, 310